Lifts


Flat Plate Gears
2000 LB Capacity
3000 LB Capacity
4000 LB Capacity
6500 LB Capacity
8500 LB Capacity
E-Drives
Jet Drive
Our fastest version of the E-Drive is the Jet Drive. Capable of speeds up to 5.3' per minute, 63.6 inches per minute, Single Line Pull. The Jet Drive is available in 4000lbs Capacity using a 480:1 Bronze E-Gear or 5000lbs Capacity using a 600:1 Bronze E-Gear, both gears incorporating an AOS 1.5HP 3450 TENV Motor. The Jet Drive offers a faster alternative to lifting while still using a large diameter gear that ensures NO backdrive, common with other enclosed gears using a smaller Ratio, or Smaller Diameter gear.
3000 LB Capacity
4000 LB Capacity
5000 LB Capacity
6000 LB Capacity
7000 LB Capacity
9000lbs Capacity 600:1 E-Gear
After extensive testing using our 600:1 E-Gear with a 2HP AOS motor AMS has engineered a version of the E-Gear capable of 9000lbs Capacity. We have spent two years testing and machining a version of our E-Drive that will allow for heavier lifting capacity. During this testing process we apply every possible situation that can occur in the field ie; overload, sudden shock load, pilling misalignment, and many other variables that occur during the life of the lift.
EBD Belt Drives
3000 LB Capacity
The EBD gear drive was developed with the concept of being light weight, faster lift speed, and capable of lifting 4000lbs capacity. The original concept was created by Electra Gear under the name PSI. This system was intended to replace the flat plate, but was not engineered for lifting torque. Although there was a high demand for the PSI, these systems created many pre mature problems in the boat lift industry, eventually leading PSI to discontinue production. Aqua Marine saw the deamand for the PSI concept and completely redesigned and reengineered the system creating the EBD. The EBD has been in production for over nine years and has allowed lift manufacturers to create a line of lifts using the EBD drive.
4000 LB Capacity
The EBD gear drive was developed with the concept of being light weight, faster lift speed, and capable of lifting 4000lbs capacity. The original concept was created by Electra Gear under the name PSI. This system was intended to replace the flat plate, but was not engineered for lifting torque. Although there was a high demand for the PSI, these systems created many pre mature problems in the boat lift industry, eventually leading PSI to discontinue production. Aqua Marine saw the deamand for the PSI concept and completely redesigned and reengineered the system creating the EBD. The EBD has been in production for over nine years and has allowed lift manufacturers to create a line of lifts using the EBD drive.
Vertical Lift Conversion Kit
Using the EBD or Flat Plate we can easily convert the standard manual Vertical Aluminum lift to power. There is a large and growing market for free standing vertical aluminum lifts. These lifts are common among shallow lakes across the midwest and parts of the south. They commonly come with a large winch and wheel mechanism for manual use, which can be very cumbersome and tiring on the end user to raise and lower by hand. Aqua Marine has provided a flat plate, and galvanized cable drum to power these systems to manufacturers over the years, but saw the need for a more refined option. Using the EBD, or for a more Economical option the Flat plate, we created a bracket kit and cable drum with aluminum winder that simply bolts to the frame of the lift. This all in one kit allows the manufacturer, or homeowner, to bolt everything needed to the frame of the lift. NO DRILLING OR ALTERCATION REQUIRED. This system will easily fit any 3" square or 3" round(Shore Station) vertical lift models. All hardware necessary to bolt system to frame is included. System is also available in 12Volt and can come equipped with a remote control option.
PWC
1250 LB Capacity
1/2 HP AOS 48F Motor
14 gauge waterproof wire
7" Ductile Gear 48:1 ratio
7" Pulley & 4L260 Belt
4.5 Vertical Feet per minute
White Powder coat Housing
Baked on black Powder Coat Cable Spool
Polyethylene White Cover
Stainless Back Cover
60lbs UPS Shipping
1500 LB Capacity
3/4 HP AOS 48F Motor
14 gauge waterproof wire
7" Ductile Gear 48:1 ratio
8" Pulley & 4L280 Belt
4.0 Vertical Feet Per Minute
White Powder Coat Housing
Baked on black Powder Coat Cable Spool
Polyethylene White Cover
Stainless Back Cover
60 lbs UPS